Adjustable Short Throw Shifter (ASTS)

Document Type

Creative works or constructive object presentation

Campus where you would like to present

Ellensburg

Event Website

https://digitalcommons.cwu.edu/source

Start Date

18-5-2020

Abstract

Every manual transmission vehicle has a shift lever for changing gears. The problem is that the shifting linkage is setup up for one kind of driving. Numerous vehicles have multiple settings for the suspension to adapt to varying driving scenarios (i.e. cruising, sport, track). No vehicle currently has an adjustable short throw shifter (ASTS) that can accommodate drag racing, drifting, sports car racing, rallying, off-roading, or casual driving. The design of the ASTS solves this problem by moving the central axis of rotation of the shifter up two inches, permitting the adjustment of the shifting throw between 20 and 40%. The swivel joint, at the central axis of rotation, is increased in size for the threaded sleeve to be press fit on the inside. Adjustments to the amount of throw are made from inside the vehicle because the threaded rod travels up and down the sleeve. For safety reasons the new shifter is also required to meet the same safety standards as the stock model shifter in the test vehicle, a 2005 Ford Mustang GT. The shifter must withstand a load of 50 lbs. with less than 0.5-inch deflection. Testing demonstrated it would support a 100 lbs. load with less than 0.5-inch deflection. The final design met all the requirements and performed with a throw reduction of 20-50% and providing an adjustability of throw within a tenth of an inch, thus allowing for max versatility and personalization from the customer.

Faculty Mentor(s)

Charles Pringle

Department/Program

Engineering, Technologies, Safety & Construction

Additional Mentoring Department

https://cwu.studentopportunitycenter.com/2020/04/adjustable-short-throw-shifter-asts/

Share

COinS
 
May 18th, 12:00 PM

Adjustable Short Throw Shifter (ASTS)

Ellensburg

Every manual transmission vehicle has a shift lever for changing gears. The problem is that the shifting linkage is setup up for one kind of driving. Numerous vehicles have multiple settings for the suspension to adapt to varying driving scenarios (i.e. cruising, sport, track). No vehicle currently has an adjustable short throw shifter (ASTS) that can accommodate drag racing, drifting, sports car racing, rallying, off-roading, or casual driving. The design of the ASTS solves this problem by moving the central axis of rotation of the shifter up two inches, permitting the adjustment of the shifting throw between 20 and 40%. The swivel joint, at the central axis of rotation, is increased in size for the threaded sleeve to be press fit on the inside. Adjustments to the amount of throw are made from inside the vehicle because the threaded rod travels up and down the sleeve. For safety reasons the new shifter is also required to meet the same safety standards as the stock model shifter in the test vehicle, a 2005 Ford Mustang GT. The shifter must withstand a load of 50 lbs. with less than 0.5-inch deflection. Testing demonstrated it would support a 100 lbs. load with less than 0.5-inch deflection. The final design met all the requirements and performed with a throw reduction of 20-50% and providing an adjustability of throw within a tenth of an inch, thus allowing for max versatility and personalization from the customer.

https://digitalcommons.cwu.edu/source/2020/CEPS/26